ChimneyCrete® - Applicators - Products - Case Studies
ChimneyCrete® known to be the most versatile product for masonry chimneys & fireplaces compliant wiith NFPA 211, Local Building Code, ASTM C315 & C1283 requirements, ASTM C-199 Pier Tested for Refractory’s, & Tested ASTM C856-04 Acid and Crack Resistance.
Through out the Americas ChimneyCrete® is uesed for new installations, rebuilds, relines, and restorations. ChimneyCrete® can be used for both residential and commercial applications.
Fast & Easy none destructive solution no need to break open walls significant cost savings with fast & easy installation.
Heat Resistance temperatures well above 2000F assuring code compliance and safety.
Corrosion Resistance from elements impervious to acids sulfurous emissions, chlorides & creosote.
Compliant wiith NFPA 211, Local Building Code, ASTM C315 & C1283 requirements, ASTM C-199 Pier Tested for Refractory’s, & Tested ASTM C856-04 Acid and Crack Resistance.
Manufactured made in the USA fully guaranteed supporting local tradesman in your area.
Installing a metal chimney liner might be the biggest con game ever played upon the Citizens of North America.
In probably about 90% of the cases the chimney owner was convinced that his world was going to end without a stainless chimney liner by a "professional", Possibly a Metal Chimney Liner was completely unnecessary, unfortunately for most people, you can rarely count on an honest evaluation of your chimney by most so-called "professionals". So, is it necessary? well without seeing the inside of your particular chimney you cannot be 100% certain, however if you have a fireclay liner, and if your chimney seems from the exterior to be in good condition (no very large cracks, crumbling brick/ mortar) you could be about 90% sure the fireclay chimney liner is fine or repairable.
FireClay is an approved liner for venting wood, natural gas and oil appliances. You can most likely disregard "professionals" attempt at making the chimney owner to pay to needlessly reline the chimney with a metal chimney liner.
Ask your self FireClay types of chimney liners that have worked fine for the last 70 years suddenly need to be lined with a metal chimney liner in order to work?
Exception "With the new high efficiency appliances, there is not enough heat released up the flue to keep the flue gases from condensing in oversized chimneys. A correctly sized liner will heat up quicker and alleviate the corrosive condensate from forming"
true; however, the cases where this actually happens are rare, and it usually occurs only on very oversized poorly jointed or unlined flues in chimneys that are located on the exterior of walls.
I don't wish to start a long drawn out debate with this issue because there are so many "in the industry", they will defend to the death the propaganda that just about every chimney needs to be relined. Fact is more often than not relining is not necessary, and more often than not chimney sweeps and hearth "professionals" are simply looking to reline their pockets by relining the chimney
I maintain that, in general, relining is an unnecessary attempt by "hearth professionals" to take even more of the chimney owners money.
NYC FGC 503.5.6.1 Chimney Lining
NFPA 211.14.9
If the flue liner in a chimney has softened, cracked or otherwise deteriorated so that it no longer has the continued ability to contain the products of combustion (I.E. heat, moisture, creosote & flue gases), the liner shall be removed & replaced, repaired, or relined with a listed liner system.
NYC MC 801.16 Flue lining
Masonry chimneys shall be lined. The lining material shall be compatible with the type of appliance connected, in accordance with the appliance listing and manufacturer’s installation instructions. Listed materials used as flue linings shall be installed in accordance with their listings and the manufacturer’s installation instructions.
NYC MC 801.16.1 Residential and low-heat appliances (general)
Flue lining systems for use with residential-type and low-heat appliances shall be limited to the following:
The New York City Office of Technical Certification and Research (OTCR) & the Fire Department of New York (FDNY) Technology Management Bureau of Fire Prevention evaluated ChimneyCrete® performed inspections of technical certifications, and evaluated new technology that enhances chimney safety, sustainability and efficiency giving ChimneyCrete® approval for use in the New York City Jurisdiction
Please reach us at info@datocomm.com if you cannot find an answer to your question.
dAtosComm™ offers a range of IT services including network setup, cloud solutions, cybersecurity, and software development.
dAtosComm™ has experience working with clients in various industries including healthcare, finance, and education.
The cost of dAtosComm™'s services varies depending on the specific needs of the client. Contact us for a personalized quote.
Photo a damaged leaking chimney base for a heating system.
Photo of ChimneyCrete® 2.5 Sprayer
Photo after the ChimneyCrete® application sealing the chimney base.
Client believed they required a metal chimney liner for their heating chimney costing 10's of thousands of dollars, after a RVCI™ far left photo was revealed the chimney base only was damaged causing the leaking after a ChimneyCrete® application middle photo the chimney base was fully sealed right photo and the chimney was put back into operation saving the client 10's of thousands of dollars.
FDNY FIRE CODE: CHAPTER 6 BUILDING SERVICE & SYSTEMS 603.6 Chimney installation. Chimneys, smokestacks or similar devices for conveying smoke or hot gases to the outer air and the incinerators, stoves, furnaces, fireboxes or boilers to which such devices are connected, shall be maintained so as not to create a fire.
The FDNY Foundation is the official non-profit organization of the New York City Fire Department. Your support directly assists the men and women of the FDNY To Better Protect New York through a number of key initiatives. When you make a donation or purchase here, you are making New York City safer.
Our team of developers can help you create custom software tailored to your business needs. From web applications to mobile apps, we can develop software that can help streamline your business processes.
Our team of developers can help you create custom software tailored to your business needs. From web applications to mobile apps, we can develop software that can help streamline your business processes.
We love our customers, so feel free to visit during normal business hours.
Mon | 09:00 am – 05:00 pm | |
Tue | 09:00 am – 05:00 pm | |
Wed | 09:00 am – 05:00 pm | |
Thu | 09:00 am – 05:00 pm | |
Fri | 09:00 am – 05:00 pm | |
Sat | Closed | |
Sun | Closed |
Copyright © 2023 dAtosComm™ - All Rights Reserved - Todos los Derechos Reservados.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.